往复式活塞压缩机中间喷液制冷系统的(火用)分析

通过对往复式活塞压缩机进行改造，在单级活塞压缩系统的基础上搭建了一种中间喷液冷却的准两级压缩系统并在蒸发温度为-20 ℃的工况下进行实验测量，根据实验数据对单级活塞压缩系统和新型中间喷液冷却活塞压缩系统的COP、〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失和〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗效率进行计算。结果表明：加入中间喷液冷却系统后，系统的COP由1.27提升至1.36，单位制冷量由155.1 kJ/kg提升至176.7 kJ/kg；单级活塞压缩系统〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失较大的部分是压缩机和膨胀阀，分别占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的16.2%和14.8%，加入中间喷液冷却系统后压缩机部分的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失明显降低，仅占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的3.6%，冷凝器及膨胀阀的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损比也有所下降。     

Effect of back-diffusion on the performance of an electrochemical hydrogen compressor

Hydrogen offers the potential to decarbonize the automotive and stationary power sectors and is therefore expected to play an increasingly significant role in meeting global energy demand. However, due to its low volumetric and gravimetric energy densities, it is important to find methods to efficiently store hydrogen in order to grow the hydrogen economy. Storing hydrogen as a compressed gas could be achieved by electrochemical compression (ECC), which is a membrane-based alternative to conventional mechanical compressors. ECC can be superior to mechanical compressors because of its higher efficiency, lack of moving parts and noiseless operation. Here, we report on the ECC of hydrogen using a Nafion 115 membrane at room temperature. Pressure vs. time curves have been collected at various operating voltages, and a compression ratio of 150 has been achieved with a single cell at an operating voltage of 0.1 V. This work focuses on the loss in electrochemical compression efficiency due to back-diffusion. A theoretical formulation for the ECC process incorporating back-diffusion is proposed and validated by experiments. A robust definition for ECC efficiency that properly accounts for back diffusion is also proposed.     

A signal adaptive diffusion filter for video coding: Mathematical framework and complexity reductions

In this paper we combine video compression and modern image processing methods. We construct novel iterative filter methods for prediction signals based on Partial Differential Equation (PDE) based methods. The mathematical framework of the employed diffusion filter class is given and some desirable properties are stated. In particular, two types of diffusion filters are constructed: a uniform diffusion filter using a fixed filter mask and a signal adaptive diffusion filter that incorporates the structures of the underlying prediction signal. The latter has the advantage of not attenuating existing edges while the uniform filter is less complex. The filters are embedded into a software based on HEVC with additional QTBT (Quadtree plus Binary Tree) and MTT (Multi-Type-Tree) block structure. In this setting, several measures to reduce the coding complexity of the tool are introduced, discussed and tested thoroughly. The coding complexity is reduced by up to 70% while maintaining over 80% of the gain. Overall, the diffusion filter method achieves average bitrate savings of 2.27% for Random Access having an average encoder runtime complexity of 119% and 117% decoder runtime complexity. For individual test sequences, results of 7.36% for Random Access are accomplished.     

附加外场力对锌锅表层锌液流动和锌渣分布的影响

实测了热镀锌锌锅表层锌液的流速,并分析了锌锅浮渣的分布特点,提出了一种在锌锅锌液上方主动加载外场力作用以驱动锌液流动进而改变锌渣分布的新方法,称为锌渣流动管理方法(DFMS-Dross Flowing Management System)。通过源力加载的方式修正了流体动量守恒方程,建立了锌液流场数值计算模型,模拟了不同外场力加载布局下锌锅表层锌液的流场。结果表明,附加外场力作用可有效促进锌锅表层锌液的切向流动,最大切向流速可达0.8 m/s;表层锌液的切向流动可拖动锌渣跟随流动,进而改变锌渣分布,促进锌锅排渣,证实了DFMS的有效性。模拟结果还表明,锌锅表层锌液的切向流速受外场力加载时间的影响较小,而随加载外场力的增大而增大,但加载外场力的大小对100~200 mm深锌液的流速影响较小。最后,通过定义锌锅表层锌液的排渣时间因子讨论了不同外场力加载方式的排渣效率。     

一种快速解压的无损压缩算法

随着信息技术的不断发展,大量数据给存储和传输都带来了巨大的挑战。数据压缩能够有效减少数据量,方便数据的处理和传输。无损压缩是一种利用数据的冗余特点进行压缩的压缩方法,解压时可以完全还原数据而不会有任何失真。在研究LZO算法的快速解压原理基础上,设计了一种新的压缩算法。该算法通过减少压缩数据中压缩块的数量,降低了解压程序的执行开销。测试结果表明,新算法可实现比LZO算法更快的解压速度。     

低活化马氏体钢热变形行为及机理型本构建模研究

利用Gleeble-3500热模拟试验机研究了低活化马氏体钢在变形温度为850～950 ℃、应变速率为0.001～1 s^-1条件下的热变形行为。建立了流变应力本构方程，并评估了该方程的预测能力。绘制了低活化马氏体钢在不同应变下的热加工图。结果表明：在较高的应变速率条件下，该材料主要发生动态回复，在较高变形温度和较低应变速率下具有明显的动态再结晶特征；本构方程的预测结果与实验结果符合良好；变形温度870～930 ℃、应变速率0.001～0.01 s^-1和变形温度920～950 ℃、应变速率0.3～1 s^-1分别是真应变为0.4和0.6下最优的热加工区域。     

游戏机手柄热流道立式注塑4层叠层注塑模设计

设计了一种4层叠层模用于实现游戏机手柄的高效率注塑生产，解决了塑件成型时在保证塑件成型精度的基础上，单次注塑量产数量4倍倍增难题。4层叠层模的结构由4层结构相同的单层模具通过一定的空间组序排列组装后，应用立式注塑机来进行注射成型。单层模结构设计采用两板式2次开模热流道浇注两板模形式，第一次开模用于热流道嘴与塑件的冷流道部分分离，第二次开模用于塑件从型腔镶件中脱模脱出。为解决单层模做4层叠层组合后，顶出板无动力顶出的问题，在单层模的模架模板侧边对称设置了拉杆，将单层模在开模动力转化为单层模中顶出板的顶出拉力，巧妙地解决了单层模做4层叠层安装后各单层模的顶出元件顶出板无推动力的问题。模具结构布局及机构的驱动设置设计合理，有较好的工程设计参考意义。     

费托合成尾气脱碳工艺选择及试车问题分析与优化

综述了不同尾气脱碳工艺的优缺点及适用条件,指出热钾碱法是目前较适用于大型费托合成尾气中CO2脱除的方法。介绍了处理尾气规模为60万m3/h的某热钾碱脱碳工艺流程,针对该装置在投料试车过程中出现的再生系统能耗高、费托合成尾气水洗效果差、吸收塔填料易堵塞及再生气排放非甲烷总烃超标等问题,进行了原因分析,并提出了一系列工艺调整及设备改造措施。实际运行结果表明,所采取的优化措施能够有效解决上述问题。     

基于Druck-Prager和MISO模型的混凝土 三轴压缩行为有限元模拟

本文采用有限元分析软件ANSYS模拟了不同围压(0,25.5,51.2 MPa)条件下素混凝土圆柱试样压缩响应特征。首先,综合对比分析了Druck-Prager模型及多线性强化(MISO)模型的模拟效果。此外,进一步基于MISO模型分析了混凝土试件端部约束条件对模拟结果的影响。最终得到的主要结论包括:(1)单轴压缩条件下,有限元模拟结果与试验结果一致性较好,且Druck-Prager模型更适宜模拟混凝土体应变特征;(2)施加围压时,MISO模型所得抗压强度较保守,而Druck-Prager模型高估了混凝土抗压强度;(3)就MISO模型而言,端部摩擦约束对混凝土应力—应变曲线无显著影响,但会加剧混凝土体积膨胀(剪胀)。     

Refrigerant charge reduction in vapor compression refrigeration cycles via liquid-to-suction heat exchange

This short communication reports a study of the potential for refrigerant charge reduction in vapor compression refrigeration systems by means of a liquid-to-suction heat exchanger. The analysis was carried out on purely thermodynamic grounds for refrigerants of current interest, such as R134a, R22, R290, R600a and R717, assuming the cooling capacity as a constraint so that the evaporating pressure is free to vary. It was found that the minimum amount of refrigerant can be reduced depending on the thermophysical properties of the refrigerant, the working conditions, and the charge inventory.